OEM Manufacturer Polypropylene Board - PA6 Rod – Jing Gu

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

High quality Initial,and Buyer Supreme is our guideline to offer the ideal assistance to our shoppers.At present, we are striving our best to become amongst the ideal exporters inside our industry to satisfy shoppers more want for Acetal Delrin Rod , Plastic Sheet , Machined Parts , Good quality would be the key factor to the company to stand out from other competitors. Seeing is Believing, want far more info? Just trial on its items!
OEM Manufacturer Polypropylene Board - PA6 Rod – Jing Gu Detail:

Product Description
Extruded nylon is the most important engineering plastics. The product is widely used in almost every fields and it’s the most widely used plastic of the five engineering plastics. There are many types of nylon, including nylon 6, nylon 66, nylon 11, nylon 12, nylon 46, nylon 610, etc. However, nylon 6 and nylon 66 are the most important varieties and the output of nylon 6 and nylon 66 are dominant.
PA6 is a translucent or opaque milky crystalline polymer which is made of polymerization of caprolactam monomer at high temperature. The material has the most superior comprehensive performance including mechanical strength, stiffness, toughness, mechanical shock resistance and wear resistance. All these properties combined with good electrical insulation and chemical resistance make PA6 a general purpose grade material for manufacture of mechanical components and maintainable parts.

JING GU PRODUCT PHYSICAL PROPERTIES

Property

Items

Test method

Unit

JING GU PA6

Mechanical property

Tensile strength

ISO 527-1、2

Mpa

78

Bending strength

ISO 178

Mpa

100

Bending tensile stress

ISO 527

Mpa

76/-

Stretching strain at break

ISO 527

%

>50

Tensile modules of elasticity

ISO 527

Mpa

3250

Compressive stress under 1% and 2% normal strain

ISO 604

Mpa

24/46

Pendulum impact test

ISO 179/1eA

kj/m2

5.5

Rockwell hardness

 

HR

R106

Physical property

Density

ISO 1183

g/cm3

1.14

Water absorption (23℃ water soak for 24 hours)

ISO 62

%

1.28

Coefficients of linear thermal expansion (23-100℃ average value)

 

m/(m.k)

90×10-6

Flammability (UL)

UL94

 

HB

Heat resistance

Melting point

 

220

Temperature resistance (continuous)

 

80

Temperature resistance (short time)

 

120

Insulating property

Dielectric strength

ISO 60243

kv/mm

25

Volume resistance

ISO 60093

Ω·cm

1O14

Surface resistance

ISO 60093

Ω

1O13

Relative permittivity -100HZ/1MHZ

ISO 60250

 

3.9/3.3

Chemical property

Acid resistance

 

 

﹢/0

Alkali resistance

 

 

+

Carbonation resistance

 

 

﹢/0

Aromatic compounds resistance

 

 

﹢/0

Ketone resistance

 

 

+

Other

Adhesion

 

 

+

Friction coefficient

 

 

0.36

Food contact

 

 

+

Remark

1.Above data is only for reference.It may vary according to different processing method and sample.
2.These data can’t be simply transferred to the finished parts.The applicability of materials for specific applications should be tested by the processor and user.
3.These technical parameters are used as a help.They do not represent a promise of performance.
4.Above specification “+” represents resistant, “-” represents resistless, “0″ represents it depends.

Properties
1. High mechanical strength, good toughness, high tensile and compressive strength
2. Excellent fatigue resistance
3. Smooth surface with low friction coefficient, good wear resistance
4. Corrosion resistance, resistant to alkali, most salt solutions, weak acids, engine oil and gasoline
5. Non-toxic, inert to bioerosion, good antibacterial and antiviral ability
6. Heat resistance, wide temperature range for using, can be long-term used at -40℃ to 100℃
7. Excellent electrical performance, good electrical insulation
8. Not resistant to strong acids and oxidants
9. Poor light resistance and dye ability
Application
Widely used in machinery, automotive, electrical, chemical, aviation, marine and other fields, replacing copper and wearing parts of other metal materials such as bearing, shaft sleeve, bushing, gear, rack, pulley, slider, nut, screw, piston ring, chain wheel, belt pulley, pump impeller, valve seat and so on.


Product detail pictures:

OEM Manufacturer Polypropylene Board -
 PA6 Rod – Jing Gu detail pictures

OEM Manufacturer Polypropylene Board -
 PA6 Rod – Jing Gu detail pictures

OEM Manufacturer Polypropylene Board -
 PA6 Rod – Jing Gu detail pictures


Related Product Guide:
Faced-with-challenges-plastics-recycling-rate-slips logo-pn-color logo-pn-color | Engineering Plastic
Oxygen Bags Market 2019 | Top Leading Countries, Companies, Consumption, Forces Analysis 2027 | Acetal Delrin Rod

We often stay with the principle "Quality Very first, Prestige Supreme". We have been fully committed to supplying our consumers with competitively priced high-quality goods, prompt delivery and skilled provider for OEM Manufacturer Polypropylene Board - PA6 Rod – Jing Gu , The product will supply to all over the world, such as: Canada , America , Jamaica , We attained ISO9001 which provides solid foundation for our further development. Persisting in "High quality, Prompt Delivery, Competitive Price", we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments. It is our great honor to meet your demands. We are sincerely expecting your attention.
  • Perfect services, quality products and competitive prices, we have work many times, every time is delighted, wish continue to maintain!
    5 Stars By Mandy from Grenada - 2015.06.30 17:29
    Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
    5 Stars By Janice from Greek - 2015.07.26 16:51
    Write your message here and send it to us