Wholesale OEM Factory for Pp Board - PVC Rod – Jing Gu factory and suppliers

OEM Factory for Pp Board - PVC Rod – Jing Gu

Short Description:

Product Detail

Product Tags

Feedback (2)

Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for Acetal Plastic Rod , Polypropylene Rod Stock , Teflon Tube , We guaranteed high quality, if clients were not satisfied with the products' quality, you can return inside 7days with their original states.

OEM Factory for Pp Board - PVC Rod – Jing Gu Detail:

Product Description
Polyvinyl chloride is a polymer material that uses a chlorine atom to replace one hydrogen atom in polyethylene. It’s a non-crystalline material with good flame retardancy and chemical properties. It can be bonded and welded, and only produces low tensile crack stress.

JING GU PRODUCT PHYSICAL PROPERTIES
Property	Items	Test method	Unit	JING GU PVC
Mechanical property	Tensile strength	ISO 527-1、2	Mpa
	Bending strength	ISO 178	Mpa
	Bending tensile stress	ISO 527	Mpa	90/-
	Stretching strain at break	ISO 527	%
	Tensile modules of elasticity	ISO 527	Mpa	3000
	Compressive stress under 1% and 2% normal strain	ISO 604	Mpa	1.6/-
	Pendulum impact test	ISO 179/1eA	kj/m²
	Rockwell hardness		HR
Physical property	Density	ISO 1183	g/cm³	1.45
	Water absorption (23℃ water soak for 24 hours)	ISO 62	%
	Coefficients of linear thermal expansion (23-100℃ average value)		m/(m.k)	80×10^-6
	Flammability (UL)	UL94		V-0
Heat resistance	Melting point		℃	120
	Temperature resistance (continuous)		℃	60
	Temperature resistance (short time)		℃
Insulating property	Dielectric strength	ISO 60243	kv/mm	20-40
	Volume resistance	ISO 60093	Ω·cm	≥1O¹⁵
	Surface resistance	ISO 60093	Ω	≥1O¹³
	Relative permittivity -100HZ/1MHZ	ISO 60250
Chemical property	Acid resistance			+
	Alkali resistance			+
	Carbonation resistance			+
	Aromatic compounds resistance			0
	Ketone resistance			-
Other	Adhesion			+
	Friction coefficient			0.6
	Food contact			-

Properties
1. High mechanical strength, high tensile strength and hardness
2. Flame resistance, heat resistance
3. Good electrical insulation
4. High corrosion resistance, resistant to strong acid and alkali
5. Low impact strength
6. Poor stability to light and heat
Application
Widely used in chemical and pharmaceutical industries to manufacture durable chemicals, corrosion-resistant chemical equipment, electrolyzer, electroplating tanks, pumps and valve bodies, gaskets, bearing frames, pipes, etc.

Product detail pictures:

Related Product Guide:
Tarpaulin Sheets Market is Expected to Grow at a CAGR of 4.4% by the End of 2028 | Pom Plastic Sheet
Polyoxymethylene (POM) Market (2019 – 2024) Segmented by Type, End-User Industry, and Geography – Growth, Trends Analysis and Forecast upto upcoming five years | Pvc Sheet 4×8

Persisting in "High quality, Prompt Delivery, Aggressive Price", we have established long-term cooperation with clientele from both equally overseas and domestically and get new and old clients' higher comments for OEM Factory for Pp Board - PVC Rod – Jing Gu , The product will supply to all over the world, such as: Kazakhstan , Ottawa , Hamburg , we are fully determined to control the whole supply chain so as to provide quality products at competitive price in a timely manner. We are keeping up with the advanced techniques, growing through creating more values for our clients and society.

Nylon 6 Rod

Nylon Cutting Board

Polyethylene Board

Polypropylene Rod Suppliers

Ptfe Board

White Pvc Rod

It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!

By Claire from Haiti - 2016.10.25 15:53

We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.

By Eartha from panama - 2016.05.02 11:33

Write your message here and send it to us