Wholesale Factory source Pe Sheet - POM Rod – Jing Gu factory and suppliers

Factory source Pe Sheet - POM Rod – Jing Gu

Short Description:

Product Detail

Product Tags

Feedback (2)

carry on to further improve, to guarantee merchandise high-quality in line with market and buyer standard necessities. Our organization has a top quality assurance procedure have already been established for Red Acetal Rod , Acetal Plastic Sheet , Pom Rod , With a wide range, top quality, reasonable rates and stylish designs, our products are extensively used with this industries and other industries.

Factory source Pe Sheet - POM Rod – Jing Gu Detail:

Product Description
Polyoxymethylene, commonly known as POM, it is a thermoplastic engineering plastics with high melting point and high crystallinity, a yellowish or white crystalline polymer with smooth and dense surface. According to the chemical structure of molecular chain, it can be divided into polyformaldehyde copolymer and polyformaldehyde homopolymer.
Comparing the properties of polyformaldehyde copolymer with polyformaldehyde homopolymer, some properties of copolymer are superior to homopolymer such as low melting point, thermal stability, chemical resistance, liquidity, hydrolysis resistance, acid and alkali resistance, superior process ability. However, some properties of homopolymer are also better than copolymer including high crystallinity, creep resistance, lower thermal expansion, abrasion resistance, good mechanical strength, high rigidity and so on.

JING GU PRODUCT PHYSICAL PROPERTIES
Property	Items	Test method	Unit	JING GU POM
Mechanical property	Tensile strength	ISO 527-1、2	Mpa	57
	Bending strength	ISO 178	Mpa	76
	Bending tensile stress	ISO 527	Mpa	68/-
	Stretching strain at break	ISO 527	%	35
	Tensile modules of elasticity	ISO 527	Mpa	3100
	Compressive stress under 1% and 2% normal strain	ISO 604	Mpa	19/35
	Pendulum impact test	ISO 179/1eA	kj/m²	8.6
	Rockwell hardness		HR	L97
Physical property	Density	ISO 1183	g/cm³	1.41
	Water absorption (23℃ water soak for 24 hours)	ISO 62	%	0.22
	Coefficients of linear thermal expansion (23-100℃ average value)		m/(m.k)	110×10^-5
	Flammability (UL)	UL94		HB
Heat resistance	Melting point		℃	165
	Temperature resistance (continuous)		℃	105
	Temperature resistance (short time)		℃	140
Insulating property	Dielectric strength	ISO 60243	kv/mm	20
	Volume resistance	ISO 60093	Ω·cm	1O¹⁴
	Surface resistance	ISO 60093	Ω	1O¹⁶
	Relative permittivity -100HZ/1MHZ	ISO 60250		3.8/3.8
Chemical property	Acid resistance			-
	Alkali resistance			+
	Carbonation resistance			+
	Aromatic compounds resistance			+
	Ketone resistance			+
Other	Adhesion			+
	Friction coefficient			0.32
	Food contact			+
Remark	1.Above data is only for reference.It may vary according to different processing method and sample. 2.These data can’t be simply transferred to the finished parts.The applicability of materials for specific applications should be tested by the processor and user. 3.These technical parameters are used as a help.They do not represent a promise of performance. 4.Above specification “+” represents resistant, “-” represents resistless, “0″ represents it depends.

Properties
1. Strong mechanical strength, high rigidity and hardness
2. Good sliding performance, abrasion resistance and creep resistance
3. Good dimensional stability
4. Physiological inertia and suitable to contact with food
5. Good machinability
6. Low impact strength
7. Poor acid resistance and weather resistance
Application
Widely used for sliding and rotating machinery, precision components, gears and bearings in automotive, electronics, medical care, machinery and sports apparatus.

Product detail pictures:

Related Product Guide:
Polyplastics Plans Expansion in Europe and Americas with New POM Grades for Food Contact Applications | Polyethylene Hdpe Sheet
New WORX Workstations Make Do-It-Yourself Projects Run Easier | Engineering Plastic

It truly is a great way to improve our merchandise and repair. Our mission should be to create imaginative products to prospects with a excellent knowledge for Factory source Pe Sheet - POM Rod – Jing Gu , The product will supply to all over the world, such as: Sri Lanka , Malta , Costa rica , So We also continuously function. we, focuse on high quality, and are conscious of the importance of environmental protection, most of the merchandise are pollution-free, environmentally friendly solutions, reuse on the solution. We've Updated our catalog, which introduces our organization. n detail and covers the primary products we provide at present, You may also visit our web-site, which involves our most recent product line. We look forward to reactivating our company connection.

Acetal Delrin Rod

Acetal Plastic Sheet

Hdpe Plastic Sheet

PA6 Rod

Plastic Sheet

Polypropylene Sheet

The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme", we have always maintained business cooperation. Work with you,we feel easy!