Wholesale Manufacturer ofPolyethylene Board - PVC Rod – Jing Gu factory and suppliers

Manufacturer ofPolyethylene Board - PVC Rod – Jing Gu

Short Description:

Product Detail

Product Tags

Feedback (2)

Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for Pvc Rod , Thick Plastic Sheet , Polypropylene Rod , We welcome shoppers, enterprise associations and buddies from all areas of your environment to speak to us and request cooperation for mutual gains.

Manufacturer ofPolyethylene Board - PVC Rod – Jing Gu Detail:

Product Description
Polyvinyl chloride is a polymer material that uses a chlorine atom to replace one hydrogen atom in polyethylene. It’s a non-crystalline material with good flame retardancy and chemical properties. It can be bonded and welded, and only produces low tensile crack stress.

JING GU PRODUCT PHYSICAL PROPERTIES
Property	Items	Test method	Unit	JING GU PVC
Mechanical property	Tensile strength	ISO 527-1、2	Mpa
	Bending strength	ISO 178	Mpa
	Bending tensile stress	ISO 527	Mpa	90/-
	Stretching strain at break	ISO 527	%
	Tensile modules of elasticity	ISO 527	Mpa	3000
	Compressive stress under 1% and 2% normal strain	ISO 604	Mpa	1.6/-
	Pendulum impact test	ISO 179/1eA	kj/m²
	Rockwell hardness		HR
Physical property	Density	ISO 1183	g/cm³	1.45
	Water absorption (23℃ water soak for 24 hours)	ISO 62	%
	Coefficients of linear thermal expansion (23-100℃ average value)		m/(m.k)	80×10^-6
	Flammability (UL)	UL94		V-0
Heat resistance	Melting point		℃	120
	Temperature resistance (continuous)		℃	60
	Temperature resistance (short time)		℃
Insulating property	Dielectric strength	ISO 60243	kv/mm	20-40
	Volume resistance	ISO 60093	Ω·cm	≥1O¹⁵
	Surface resistance	ISO 60093	Ω	≥1O¹³
	Relative permittivity -100HZ/1MHZ	ISO 60250
Chemical property	Acid resistance			+
	Alkali resistance			+
	Carbonation resistance			+
	Aromatic compounds resistance			0
	Ketone resistance			-
Other	Adhesion			+
	Friction coefficient			0.6
	Food contact			-

Properties
1. High mechanical strength, high tensile strength and hardness
2. Flame resistance, heat resistance
3. Good electrical insulation
4. High corrosion resistance, resistant to strong acid and alkali
5. Low impact strength
6. Poor stability to light and heat
Application
Widely used in chemical and pharmaceutical industries to manufacture durable chemicals, corrosion-resistant chemical equipment, electrolyzer, electroplating tanks, pumps and valve bodies, gaskets, bearing frames, pipes, etc.

Product detail pictures:

Related Product Guide:
New WORX Workstations Make Do-It-Yourself Projects Run Easier | Engineering Plastic
Faced-with-challenges-plastics-recycling-rate-slips logo-pn-color logo-pn-color | Engineering Plastic

We keep on with the basic principle of "quality to start with, support very first, continuous improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the quality objective. To great our service, we offer the items with all the superior top quality at the reasonable selling price for Manufacturer ofPolyethylene Board - PVC Rod – Jing Gu , The product will supply to all over the world, such as: Sri Lanka , Guinea , Bogota , We have customers from more than 20 countries and our reputation has been recognized by our esteemed customers. Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.

Hard Plastic Board

Hdpe Rod Stock

Polyethylene Sheet Supplier

Polypropylene Rod

Polypropylene Rod Suppliers

Teflon Tube

The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.