Wholesale 2017 Good Quality Polyamide Rod - ABS Rod – Jing Gu factory and suppliers

2017 Good Quality Polyamide Rod - ABS Rod – Jing Gu

Short Description:

Product Detail

Product Tags

Feedback (2)

As for competitive charges, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we have been the lowest around for Polyethylene Sheet , Red Acetal Rod , Nylon Rod Manufacturers , At our firm with good quality initially as our motto, we manufacture merchandise that are entirely made in Japan, from materials procurement to processing. This enables them for being used with confident peace of mind.

2017 Good Quality Polyamide Rod - ABS Rod – Jing Gu Detail:

Product Description
Acrylonitrile butadiene styrene copolymer (ABS) is an opaque beige thermoplastic resin which is copolymerized by acrylonitrile, butadiene and styrene.

JING GU PRODUCT PHYSICAL PROPERTIES
Property	Items	Test method	Unit	JING GU ABS
Mechanical property	Tensile strength	ISO 527-1、2	Mpa	45
	Bending strength	ISO 178	Mpa	63
	Bending tensile stress	ISO 527	Mpa	70/-
	Stretching strain at break	ISO 527	%
	Tensile modules of elasticity	ISO 527	Mpa	2100
	Compressive stress under 1% and 2% normal strain	ISO 604	Mpa	17/-
	Pendulum impact test	ISO 179/1eA	kj/m²
	Rockwell hardness		HR	R109
Physical property	Density	ISO 1183	g/cm³	1.1
	Water absorption (23℃ water soak for 24 hours)	ISO 62	%
	Coefficients of linear thermal expansion (23-100℃ average value)		m/(m.k)	100×10^-6
	Flammability (UL)	UL94		HB
Heat resistance	Melting point		℃	170
	Temperature resistance (continuous)		℃	70
	Temperature resistance (short time)		℃	85
Insulating property	Dielectric strength	ISO 60243	kv/mm	＞20
	Volume resistance	ISO 60093	Ω·cm	1O¹⁴
	Surface resistance	ISO 60093	Ω	≥1O¹³
	Relative permittivity -100HZ/1MHZ	ISO 60250
Chemical property	Acid resistance			+
	Alkali resistance			0
	Carbonation resistance			+
	Aromatic compounds resistance			-
	Ketone resistance			-
Other	Adhesion			+
	Friction coefficient			0.5
	Food contact			-
Remark	1.Above data is only for reference.It may vary according to different processing method and sample. 2.These data can’t be simply transferred to the finished parts.The applicability of materials for specific applications should be tested by the processor and user. 3.These technical parameters are used as a help.They do not represent a promise of performance. 4.Above specification “+” represents resistant, “-” represents resistless, “0″ represents it depends.

Properties
1.Good impact strength and heat resistance
2.Excellent chemical resistance and electrical insulation properties
3.Low water absorption, easy dyeing, good electroplating and corrosion resistance
4.Low bending strength and compressive strength
5.Poor weather resistance, easy to degrade under the action of ultraviolet light
Application
Widely used in automotive, electronics, electrical and other product models, mechanical parts, chemical equipment, etc.

Product detail pictures:

Related Product Guide:
Faced-with-challenges-plastics-recycling-rate-slips logo-pn-color logo-pn-color | Engineering Plastic
Global High Density Polyethylene (HDPE) Market 2019 – Dow Chemicals, Exxon Mobil Chemical, LyondellBasell | Engineering Plastic

Every single member from our large efficiency revenue team values customers' wants and company communication for 2017 Good Quality Polyamide Rod - ABS Rod – Jing Gu , The product will supply to all over the world, such as: Jamaica , Tunisia , Portland , We have customers from more than 20 countries and our reputation has been recognized by our esteemed customers. Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.

Cast Nylon Rod