Wholesale Low MOQ for Cast Nylon Price - HDPE Sheet – Jing Gu factory and suppliers

Low MOQ for Cast Nylon Price - HDPE Sheet – Jing Gu

Short Description:

Product Detail

Product Tags

Feedback (2)

We always think and practice corresponding to the change of circumstance, and grow up. We purpose at the achievement of a richer mind and body as well as the living for PTFE , Cast Nylon Rod , Pom Rod , We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.

Low MOQ for Cast Nylon Price - HDPE Sheet – Jing Gu Detail:

Product Description
High-density polyethylene (HDPE) is a kind of high-crystalinity, non-polar thermoplastic resin. It’s a milky white translucent waxy solid with good chemical stability, resistant to most acid, alkali and organic solutions, good insulation, easy to weld.

JING GU PRODUCT PHYSICAL PROPERTIES
Property	Items	Test method	Unit	JING GU HDPE
Mechanical property	Tensile strength	ISO 527-1、2	Mpa	32
	Bending strength	ISO 178	Mpa
	Bending tensile stress	ISO 527	Mpa	30
	Stretching strain at break	ISO 527	%
	Tensile modules of elasticity	ISO 527	Mpa	900
	Compressive stress under 1% and 2% normal strain	ISO 604	Mpa	3/-
	Pendulum impact test	ISO 179/1eA	kj/m²
	Rockwell hardness		HR
Physical property	Density	ISO 1183	g/cm³	0.96
	Water absorption (23℃ water soak for 24 hours)	ISO 62	%
	Coefficients of linear thermal expansion (23-100℃ average value)		m/(m.k)	155×10^-6
	Flammability (UL)	UL94		HB
Heat resistance	Melting point		℃	130
	Temperature resistance (continuous)		℃	90
	Temperature resistance (short time)		℃	110
Insulating property	Dielectric strength	ISO 60243	kv/mm	＞50
	Volume resistance	ISO 60093	Ω·cm	≥1O¹⁵
	Surface resistance	ISO 60093	Ω	≥1O¹⁶
	Relative permittivity -100HZ/1MHZ	ISO 60250		2.4/–
Chemical property	Acid resistance			+
	Alkali resistance			+
	Carbonation resistance			+
	Aromatic compounds resistance			0
	Ketone resistance			+
Other	Adhesion			0
	Friction coefficient			0.3
	Food contact			+
Remark	1.Above data is only for reference.It may vary according to different processing method and sample. 2.These data can’t be simply transferred to the finished parts.The applicability of materials for specific applications should be tested by the processor and user. 3.These technical parameters are used as a help.They do not represent a promise of performance. 4.Above specification “+” represents resistant, “-” represents resistless, “0″ represents it depends.

Properties
1.Excellent low temperature resistance, minimum operating temperature up to -70 degrees Celsius
2.Good chemical stability, resistant to most acid and alkali
3.Low water absorption, excellent electrical insulation
4.Non-toxic and environmentally friendly, food contact material
5.Poor heat resistance, poor aging resistance
Application
Widely used in the chemical, mechanical, electric power, packaging, food and other industries to manufacture wear resistant and impact resistant mechanical parts, such as drinking water pipes, hot water pipes, transportation containers, pump valve parts, medical equipment, seals, sliding profiles, etc.

Product detail pictures:

Related Product Guide:
Polyplastics Plans Expansion in Europe and Americas with New POM Grades for Food Contact Applications | Polyethylene Hdpe Sheet
Faced-with-challenges-plastics-recycling-rate-slips logo-pn-color logo-pn-color | Engineering Plastic

To be a result of ours specialty and repair consciousness, our corporation has won an excellent reputation amongst customers all around the entire world for Low MOQ for Cast Nylon Price - HDPE Sheet – Jing Gu , The product will supply to all over the world, such as: Italy , Sweden , India , Now, we professionally supplies customers with our main products And our business is not only the "buy" and "sell", but also focus on more. We target to be your loyal supplier and long-term cooperator in China. Now, We hope to be the friends with you.

Nylon Sheet