Europe style for Ptfe Sheet - PA6 Sheet – Jing Gu

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Every single member from our large efficiency profits team values customers' requirements and organization communication for Pp Rod, White Nylon Rod , Pp Rod, We always welcome new and old customers presents us with valuable advice and proposals for cooperation, let us grow and develop together, and to contribute to our community and staff!
Europe style for Ptfe Sheet - PA6 Sheet – Jing Gu Detail:

Product Description
Extruded nylon is the most important engineering plastics. The product is widely used in almost every fields and it’s the most widely used plastic of the five engineering plastics. There are many types of nylon, including nylon 6, nylon 66, nylon 11, nylon 12, nylon 46, nylon 610, etc. However, nylon 6 and nylon 66 are the most important varieties and the output of nylon 6 and nylon 66 are dominant.
PA6 is a translucent or opaque milky crystalline polymer which is made of polymerization of caprolactam monomer at high temperature. The material has the most superior comprehensive performance including mechanical strength, stiffness, toughness, mechanical shock resistance and wear resistance. All these properties combined with good electrical insulation and chemical resistance make PA6 a general purpose grade material for manufacture of mechanical components and maintainable parts.

JING GU PRODUCT PHYSICAL PROPERTIES

Property

Items

Test method

Unit

JING GU PA6

Mechanical property

Tensile strength

ISO 527-1、2

Mpa

78

Bending strength

ISO 178

Mpa

100

Bending tensile stress

ISO 527

Mpa

76/-

Stretching strain at break

ISO 527

%

>50

Tensile modules of elasticity

ISO 527

Mpa

3250

Compressive stress under 1% and 2% normal strain

ISO 604

Mpa

24/46

Pendulum impact test

ISO 179/1eA

kj/m2

5.5

Rockwell hardness

 

HR

R106

Physical property

Density

ISO 1183

g/cm3

1.14

Water absorption (23℃ water soak for 24 hours)

ISO 62

%

1.28

Coefficients of linear thermal expansion (23-100℃ average value)

 

m/(m.k)

90×10-6

Flammability (UL)

UL94

 

HB

Heat resistance

Melting point

 

220

Temperature resistance (continuous)

 

80

Temperature resistance (short time)

 

120

Insulating property

Dielectric strength

ISO 60243

kv/mm

25

Volume resistance

ISO 60093

Ω·cm

1O14

Surface resistance

ISO 60093

Ω

1O13

Relative permittivity -100HZ/1MHZ

ISO 60250

 

3.9/3.3

Chemical property

Acid resistance

 

 

﹢/0

Alkali resistance

 

 

+

Carbonation resistance

 

 

﹢/0

Aromatic compounds resistance

 

 

﹢/0

Ketone resistance

 

 

+

Other

Adhesion

 

 

+

Friction coefficient

 

 

0.36

Food contact

 

 

+

Remark

1.Above data is only for reference.It may vary according to different processing method and sample.
2.These data can’t be simply transferred to the finished parts.The applicability of materials for specific applications should be tested by the processor and user.
3.These technical parameters are used as a help.They do not represent a promise of performance.
4.Above specification “+” represents resistant, “-” represents resistless, “0″ represents it depends.

Properties
1. High mechanical strength, good toughness, high tensile and compressive strength
2. Excellent fatigue resistance
3. Smooth surface with low friction coefficient, good wear resistance
4. Corrosion resistance, resistant to alkali, most salt solutions, weak acids, engine oil and gasoline
5. Non-toxic, inert to bioerosion, good antibacterial and antiviral ability
6. Heat resistance, wide temperature range for using, can be long-term used at -40℃ to 100℃
7. Excellent electrical performance, good electrical insulation
8. Not resistant to strong acids and oxidants
9. Poor light resistance and dye ability
Application
Widely used in machinery, automotive, electrical, chemical, aviation, marine and other fields, replacing copper and wearing parts of other metal materials such as bearing, shaft sleeve, bushing, gear, rack, pulley, slider, nut, screw, piston ring, chain wheel, belt pulley, pump impeller, valve seat and so on.


Product detail pictures:

Europe style for Ptfe Sheet -
 PA6 Sheet – Jing Gu detail pictures

Europe style for Ptfe Sheet -
 PA6 Sheet – Jing Gu detail pictures

Europe style for Ptfe Sheet -
 PA6 Sheet – Jing Gu detail pictures


Related Product Guide:
Engineering Plastic Compounds Market 2019 Is Growing with Highest Size, Share of Top Key Players in the Industry and Forecast Survey Till 2024 | Acetal Delrin Rod
Geotextile Fabrics Market Analysis, Revenue, Price, Share, Growth Rate, Forecast 2028 | Engineering Plastic

Sticking to the belief of "Creating products of high quality and making friends with people from all over the world", we always put the interest of customers in the first place for Europe style for Ptfe Sheet - PA6 Sheet – Jing Gu , The product will supply to all over the world, such as: Cape Town , Liberia , Iceland , With more and more Chinese products around the world, our international business is developing rapidly and economic indicators big increase year by year. We have enough confidence to offer you both better products and service, because we are more and more powerful, professional and experience in domestic and international.
  • The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
    5 Stars By Jessie from Monaco - 2015.04.25 16:46
    The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
    5 Stars By Merry from Amsterdam - 2015.06.19 10:42
    Write your message here and send it to us