China OEM Pe Rod - PA6 Rod – Jing Gu

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

It adheres on the tenet "Honest, industrious, enterprising, innovative" to develop new items frequently. It regards buyers, success as its very own success. Let us produce prosperous future hand in hand for Mc Nylon Rod , PA6 Rod , Pp Board , The many thoughts and suggestions is going to be drastically appreciated! The great cooperation could boost each of us into better development!
China OEM Pe Rod - PA6 Rod – Jing Gu Detail:

Product Description
Extruded nylon is the most important engineering plastics. The product is widely used in almost every fields and it’s the most widely used plastic of the five engineering plastics. There are many types of nylon, including nylon 6, nylon 66, nylon 11, nylon 12, nylon 46, nylon 610, etc. However, nylon 6 and nylon 66 are the most important varieties and the output of nylon 6 and nylon 66 are dominant.
PA6 is a translucent or opaque milky crystalline polymer which is made of polymerization of caprolactam monomer at high temperature. The material has the most superior comprehensive performance including mechanical strength, stiffness, toughness, mechanical shock resistance and wear resistance. All these properties combined with good electrical insulation and chemical resistance make PA6 a general purpose grade material for manufacture of mechanical components and maintainable parts.

JING GU PRODUCT PHYSICAL PROPERTIES

Property

Items

Test method

Unit

JING GU PA6

Mechanical property

Tensile strength

ISO 527-1、2

Mpa

78

Bending strength

ISO 178

Mpa

100

Bending tensile stress

ISO 527

Mpa

76/-

Stretching strain at break

ISO 527

%

>50

Tensile modules of elasticity

ISO 527

Mpa

3250

Compressive stress under 1% and 2% normal strain

ISO 604

Mpa

24/46

Pendulum impact test

ISO 179/1eA

kj/m2

5.5

Rockwell hardness

 

HR

R106

Physical property

Density

ISO 1183

g/cm3

1.14

Water absorption (23℃ water soak for 24 hours)

ISO 62

%

1.28

Coefficients of linear thermal expansion (23-100℃ average value)

 

m/(m.k)

90×10-6

Flammability (UL)

UL94

 

HB

Heat resistance

Melting point

 

220

Temperature resistance (continuous)

 

80

Temperature resistance (short time)

 

120

Insulating property

Dielectric strength

ISO 60243

kv/mm

25

Volume resistance

ISO 60093

Ω·cm

1O14

Surface resistance

ISO 60093

Ω

1O13

Relative permittivity -100HZ/1MHZ

ISO 60250

 

3.9/3.3

Chemical property

Acid resistance

 

 

﹢/0

Alkali resistance

 

 

+

Carbonation resistance

 

 

﹢/0

Aromatic compounds resistance

 

 

﹢/0

Ketone resistance

 

 

+

Other

Adhesion

 

 

+

Friction coefficient

 

 

0.36

Food contact

 

 

+

Remark

1.Above data is only for reference.It may vary according to different processing method and sample.
2.These data can’t be simply transferred to the finished parts.The applicability of materials for specific applications should be tested by the processor and user.
3.These technical parameters are used as a help.They do not represent a promise of performance.
4.Above specification “+” represents resistant, “-” represents resistless, “0″ represents it depends.

Properties
1. High mechanical strength, good toughness, high tensile and compressive strength
2. Excellent fatigue resistance
3. Smooth surface with low friction coefficient, good wear resistance
4. Corrosion resistance, resistant to alkali, most salt solutions, weak acids, engine oil and gasoline
5. Non-toxic, inert to bioerosion, good antibacterial and antiviral ability
6. Heat resistance, wide temperature range for using, can be long-term used at -40℃ to 100℃
7. Excellent electrical performance, good electrical insulation
8. Not resistant to strong acids and oxidants
9. Poor light resistance and dye ability
Application
Widely used in machinery, automotive, electrical, chemical, aviation, marine and other fields, replacing copper and wearing parts of other metal materials such as bearing, shaft sleeve, bushing, gear, rack, pulley, slider, nut, screw, piston ring, chain wheel, belt pulley, pump impeller, valve seat and so on.


Product detail pictures:

China OEM Pe Rod -
 PA6 Rod – Jing Gu detail pictures

China OEM Pe Rod -
 PA6 Rod – Jing Gu detail pictures

China OEM Pe Rod -
 PA6 Rod – Jing Gu detail pictures


Related Product Guide:
Oxygen Bags Market 2019 | Top Leading Countries, Companies, Consumption, Forces Analysis 2027 | Acetal Delrin Rod
Polyplastics Plans Expansion in Europe and Americas with New POM Grades for Food Contact Applications | Polyethylene Hdpe Sheet

We also present product or service sourcing and flight consolidation products and services. We have our possess manufacturing facility and sourcing place of work. We can easily supply you with almost every type of product or service connected to our item variety for China OEM Pe Rod - PA6 Rod – Jing Gu , The product will supply to all over the world, such as: Mecca , Poland , Brazil , Our products have won an excellent reputation at each of the related nations. Because the establishment of our firm. we've insisted on our production procedure innovation together with the most recent modern day managing method, attracting a sizable quantity of talents within this industry. We regard the solution good quality as our most vital essence character.
  • A good manufacturers, we have cooperated twice, good quality and good service attitude.
    5 Stars By Janice from Ethiopia - 2016.05.02 18:28
    Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces,a nice business partner.
    5 Stars By Marjorie from Cyprus - 2016.05.02 18:28
    Write your message here and send it to us