Wholesale Good Wholesale VendorsPvc Plastic Sheet - POM Sheet – Jing Gu factory and suppliers

Good Wholesale VendorsPvc Plastic Sheet - POM Sheet – Jing Gu

Short Description:

Product Detail

Product Tags

Feedback (2)

As for aggressive costs, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such high-quality at such rates we have been the lowest around for Hdpe Board , High Density Polyethylene Sheet , Cast Nylon , Our group members are goal to provides merchandise with significant performance cost ratio to our consumers, as well as target for all of us is usually to satisfy our consumers from all around the environment.

Good Wholesale VendorsPvc Plastic Sheet - POM Sheet – Jing Gu Detail:

Product Description
Polyoxymethylene, commonly known as POM, it is a thermoplastic engineering plastics with high melting point and high crystallinity, a yellowish or white crystalline polymer with smooth and dense surface. According to the chemical structure of molecular chain, it can be divided into polyformaldehyde copolymer and polyformaldehyde homopolymer.
Comparing the properties of polyformaldehyde copolymer with polyformaldehyde homopolymer, some properties of copolymer are superior to homopolymer such as low melting point, thermal stability, chemical resistance, liquidity, hydrolysis resistance, acid and alkali resistance, superior process ability. However, some properties of homopolymer are also better than copolymer including high crystallinity, creep resistance, lower thermal expansion, abrasion resistance, good mechanical strength, high rigidity and so on.

JING GU PRODUCT PHYSICAL PROPERTIES
Property	Items	Test method	Unit	JING GU POM
Mechanical property	Tensile strength	ISO 527-1、2	Mpa	57
	Bending strength	ISO 178	Mpa	76
	Bending tensile stress	ISO 527	Mpa	68/-
	Stretching strain at break	ISO 527	%	35
	Tensile modules of elasticity	ISO 527	Mpa	3100
	Compressive stress under 1% and 2% normal strain	ISO 604	Mpa	19/35
	Pendulum impact test	ISO 179/1eA	kj/m²	8.6
	Rockwell hardness		HR	L97
Physical property	Density	ISO 1183	g/cm³	1.41
	Water absorption (23℃ water soak for 24 hours)	ISO 62	%	0.22
	Coefficients of linear thermal expansion (23-100℃ average value)		m/(m.k)	110×10^-5
	Flammability (UL)	UL94		HB
Heat resistance	Melting point		℃	165
	Temperature resistance (continuous)		℃	105
	Temperature resistance (short time)		℃	140
Insulating property	Dielectric strength	ISO 60243	kv/mm	20
	Volume resistance	ISO 60093	Ω·cm	1O¹⁴
	Surface resistance	ISO 60093	Ω	1O¹⁶
	Relative permittivity -100HZ/1MHZ	ISO 60250		3.8/3.8
Chemical property	Acid resistance			-
	Alkali resistance			+
	Carbonation resistance			+
	Aromatic compounds resistance			+
	Ketone resistance			+
Other	Adhesion			+
	Friction coefficient			0.32
	Food contact			+
Remark	1.Above data is only for reference.It may vary according to different processing method and sample. 2.These data can’t be simply transferred to the finished parts.The applicability of materials for specific applications should be tested by the processor and user. 3.These technical parameters are used as a help.They do not represent a promise of performance. 4.Above specification “+” represents resistant, “-” represents resistless, “0″ represents it depends.

Properties
1. Strong mechanical strength, high rigidity and hardness
2. Good sliding performance, abrasion resistance and creep resistance
3. Good dimensional stability
4. Physiological inertia and suitable to contact with food
5. Good machinability
6. Low impact strength
7. Poor acid resistance and weather resistance
Application
Widely used for sliding and rotating machinery, precision components, gears and bearings in automotive, electronics, medical care, machinery and sports apparatus.

Product detail pictures:

Related Product Guide:
Global High Density Polyethylene (HDPE) Market 2019 – Dow Chemicals, Exxon Mobil Chemical, LyondellBasell | Engineering Plastic
Faced-with-challenges-plastics-recycling-rate-slips logo-pn-color logo-pn-color | Engineering Plastic

"Sincerity, Innovation, Rigorousness, and Efficiency" would be the persistent conception of our corporation to the long-term to establish collectively with customers for mutual reciprocity and mutual benefit for Good Wholesale VendorsPvc Plastic Sheet - POM Sheet – Jing Gu , The product will supply to all over the world, such as: Indonesia , United States , Belize , Now, with the development of internet, and the trend of internationalization, we have decided to extend business to overseas market. With the propose of bringing more profits to oversea customers by providing directly abroad. So we have changed our mind, from home to abroad, hope to give our customers more profit, and looking forward to more chance to make business.

Acetal Copolymer Sheet

Acetal Delrin Sheet

Acetal Plastic Sheet

Acetal Resin Sheet

Hdpe Board

White Acetal Rod

The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.