Wholesale China Manufacturer for Acetal Rod Stock - PP Rod – Jing Gu factory and suppliers

China Manufacturer for Acetal Rod Stock - PP Rod – Jing Gu

Short Description:

Product Detail

Product Tags

Feedback (2)

It really is our obligation to satisfy your requirements and efficiently serve you. Your fulfillment is our greatest reward. We're hunting forward to your check out for joint development for Plastic Pipe , Nylon Rod Manufacturers , Plastic Tube , How about to start your good organization with our corporation? We are all set, properly trained and fulfilled with pride. Let’s start our new business enterprise with new wave.

China Manufacturer for Acetal Rod Stock - PP Rod – Jing Gu Detail:

Product Description
Polypropylene also known as PP, is a kind of translucent milky white linear polymer with high density, no side chain and high crystallinity. It is obtained by polymerization of propylene and it’s one of the lightest varieties of all plastics.

JING GU PRODUCT PHYSICAL PROPERTIES
Property	Items	Test method	Unit	JING GU PP
Mechanical property	Tensile strength	ISO 527-1、2	Mpa	30
	Bending strength	ISO 178	Mpa
	Bending tensile stress	ISO 527	Mpa
	Stretching strain at break	ISO 527	%	＞50
	Tensile modules of elasticity	ISO 527	Mpa	1450
	Compressive stress under 1% and 2% normal strain	ISO 604	Mpa	4/-
	Pendulum impact test	ISO 179/1eA	kj/m²	5
	Rockwell hardness		HR	R85
Physical property	Density	ISO 1183	g/cm³	0.91
	Water absorption (23℃ water soak for 24 hours)	ISO 62	%
	Coefficients of linear thermal expansion (23-100℃ average value)		m/(m.k)	150×10^-6
	Flammability (UL)	UL94		HB
Heat resistance	Melting point		℃	170
	Temperature resistance (continuous)		℃	95
	Temperature resistance (short time)		℃	115
Insulating property	Dielectric strength	ISO 60243	kv/mm	＞40
	Volume resistance	ISO 60093	Ω·cm	≥1O¹⁴
	Surface resistance	ISO 60093	Ω	≥1O¹³
	Relative permittivity -100HZ/1MHZ	ISO 60250		2.3/–
Chemical property	Acid resistance			+
	Alkali resistance			+
	Carbonation resistance			+
	Aromatic compounds resistance			-
	Ketone resistance			+
Other	Adhesion			0
	Friction coefficient			0.3
	Food contact			+
Remark	1.Above data is only for reference.It may vary according to different processing method and sample. 2.These data can’t be simply transferred to the finished parts.The applicability of materials for specific applications should be tested by the processor and user. 3.These technical parameters are used as a help.They do not represent a promise of performance. 4.Above specification “+” represents resistant, “-” represents resistless, “0″ represents it depends.

Properties
1. Low density with good weldability
2. Heat resistance
3. Good corrosion resistance, resistant to strong acids and strong base
4. Non-toxic, suitable for food hygiene requirements, can be used for food utensils
5. Easy to accumulate static electricity
6. Easy to age with copper contact
7. Poor weather resistance, sensitive to ultraviolet light, easy to age
8. Poor cold resistance, low low temperature impact strength
Application
Suitable for making general mechanical parts, corrosion resistant and insulating parts, drinking water or sewage pipe, spraying carrier, corrosion resistant trough, acid and alkali resistant industry, waste water, exhaust gas discharge equipment, food machinery, chopping board, rolling pin, plating equipment and etc.

Product detail pictures:

Related Product Guide:
Polyplastics Plans Expansion in Europe and Americas with New POM Grades for Food Contact Applications | Polyethylene Hdpe Sheet
Faced-with-challenges-plastics-recycling-rate-slips logo-pn-color logo-pn-color | Engineering Plastic

All we do is usually connected with our tenet " Customer to start with, Rely on initial, devoting on the food packaging and environmental protection for China Manufacturer for Acetal Rod Stock - PP Rod – Jing Gu , The product will supply to all over the world, such as: Roman , Pakistan , Congo , All of our products comply with international quality standards and are greatly appreciated in a variety of markets around the world. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients in the near future.

Acetal Plastic Rod