Wholesale China Factory for Teflon Board - ABS Rod – Jing Gu factory and suppliers

China Factory for Teflon Board - ABS Rod – Jing Gu

Short Description:

Product Detail

Product Tags

Feedback (2)

We not only will try our best to offer excellent services to every customer, but also are ready to receive any suggestion offered by our customers for Machined Parts , Mc Nylon Plate , Teflon Sheet , In a word, when you choose us, you choose a perfect life. Welcome to visit our factory and welcome your order! For further inquiries, please do not hesitate to contact us.

China Factory for Teflon Board - ABS Rod – Jing Gu Detail:

Product Description
Acrylonitrile butadiene styrene copolymer (ABS) is an opaque beige thermoplastic resin which is copolymerized by acrylonitrile, butadiene and styrene.

JING GU PRODUCT PHYSICAL PROPERTIES
Property	Items	Test method	Unit	JING GU ABS
Mechanical property	Tensile strength	ISO 527-1、2	Mpa	45
	Bending strength	ISO 178	Mpa	63
	Bending tensile stress	ISO 527	Mpa	70/-
	Stretching strain at break	ISO 527	%
	Tensile modules of elasticity	ISO 527	Mpa	2100
	Compressive stress under 1% and 2% normal strain	ISO 604	Mpa	17/-
	Pendulum impact test	ISO 179/1eA	kj/m²
	Rockwell hardness		HR	R109
Physical property	Density	ISO 1183	g/cm³	1.1
	Water absorption (23℃ water soak for 24 hours)	ISO 62	%
	Coefficients of linear thermal expansion (23-100℃ average value)		m/(m.k)	100×10^-6
	Flammability (UL)	UL94		HB
Heat resistance	Melting point		℃	170
	Temperature resistance (continuous)		℃	70
	Temperature resistance (short time)		℃	85
Insulating property	Dielectric strength	ISO 60243	kv/mm	＞20
	Volume resistance	ISO 60093	Ω·cm	1O¹⁴
	Surface resistance	ISO 60093	Ω	≥1O¹³
	Relative permittivity -100HZ/1MHZ	ISO 60250
Chemical property	Acid resistance			+
	Alkali resistance			0
	Carbonation resistance			+
	Aromatic compounds resistance			-
	Ketone resistance			-
Other	Adhesion			+
	Friction coefficient			0.5
	Food contact			-
Remark	1.Above data is only for reference.It may vary according to different processing method and sample. 2.These data can’t be simply transferred to the finished parts.The applicability of materials for specific applications should be tested by the processor and user. 3.These technical parameters are used as a help.They do not represent a promise of performance. 4.Above specification “+” represents resistant, “-” represents resistless, “0″ represents it depends.

Properties
1.Good impact strength and heat resistance
2.Excellent chemical resistance and electrical insulation properties
3.Low water absorption, easy dyeing, good electroplating and corrosion resistance
4.Low bending strength and compressive strength
5.Poor weather resistance, easy to degrade under the action of ultraviolet light
Application
Widely used in automotive, electronics, electrical and other product models, mechanical parts, chemical equipment, etc.

Product detail pictures:

Related Product Guide:
New WORX Workstations Make Do-It-Yourself Projects Run Easier | Engineering Plastic
Faced-with-challenges-plastics-recycling-rate-slips logo-pn-color logo-pn-color | Engineering Plastic

Our primary purpose is to give our shoppers a serious and responsible company relationship, giving personalized attention to all of them for China Factory for Teflon Board - ABS Rod – Jing Gu , The product will supply to all over the world, such as: Philippines , Swaziland , Sheffield , All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.

Hdpe Board