Wholesale 8 Year Exporter High Density Polyethylene Sheet - POM Rod – Jing Gu factory and suppliers

8 Year Exporter High Density Polyethylene Sheet - POM Rod – Jing Gu

Short Description:

Product Detail

Product Tags

Feedback (2)

We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Plastic Pipe , Nylon Sheet , Hdpe Board , We look forward to supplying you with our products in the near future, and you will find our quotation is very reasonable and the quality of our products is very excellent!

8 Year Exporter High Density Polyethylene Sheet - POM Rod – Jing Gu Detail:

Product Description
Polyoxymethylene, commonly known as POM, it is a thermoplastic engineering plastics with high melting point and high crystallinity, a yellowish or white crystalline polymer with smooth and dense surface. According to the chemical structure of molecular chain, it can be divided into polyformaldehyde copolymer and polyformaldehyde homopolymer.
Comparing the properties of polyformaldehyde copolymer with polyformaldehyde homopolymer, some properties of copolymer are superior to homopolymer such as low melting point, thermal stability, chemical resistance, liquidity, hydrolysis resistance, acid and alkali resistance, superior process ability. However, some properties of homopolymer are also better than copolymer including high crystallinity, creep resistance, lower thermal expansion, abrasion resistance, good mechanical strength, high rigidity and so on.

JING GU PRODUCT PHYSICAL PROPERTIES
Property	Items	Test method	Unit	JING GU POM
Mechanical property	Tensile strength	ISO 527-1、2	Mpa	57
	Bending strength	ISO 178	Mpa	76
	Bending tensile stress	ISO 527	Mpa	68/-
	Stretching strain at break	ISO 527	%	35
	Tensile modules of elasticity	ISO 527	Mpa	3100
	Compressive stress under 1% and 2% normal strain	ISO 604	Mpa	19/35
	Pendulum impact test	ISO 179/1eA	kj/m²	8.6
	Rockwell hardness		HR	L97
Physical property	Density	ISO 1183	g/cm³	1.41
	Water absorption (23℃ water soak for 24 hours)	ISO 62	%	0.22
	Coefficients of linear thermal expansion (23-100℃ average value)		m/(m.k)	110×10^-5
	Flammability (UL)	UL94		HB
Heat resistance	Melting point		℃	165
	Temperature resistance (continuous)		℃	105
	Temperature resistance (short time)		℃	140
Insulating property	Dielectric strength	ISO 60243	kv/mm	20
	Volume resistance	ISO 60093	Ω·cm	1O¹⁴
	Surface resistance	ISO 60093	Ω	1O¹⁶
	Relative permittivity -100HZ/1MHZ	ISO 60250		3.8/3.8
Chemical property	Acid resistance			-
	Alkali resistance			+
	Carbonation resistance			+
	Aromatic compounds resistance			+
	Ketone resistance			+
Other	Adhesion			+
	Friction coefficient			0.32
	Food contact			+
Remark	1.Above data is only for reference.It may vary according to different processing method and sample. 2.These data can’t be simply transferred to the finished parts.The applicability of materials for specific applications should be tested by the processor and user. 3.These technical parameters are used as a help.They do not represent a promise of performance. 4.Above specification “+” represents resistant, “-” represents resistless, “0″ represents it depends.

Properties
1. Strong mechanical strength, high rigidity and hardness
2. Good sliding performance, abrasion resistance and creep resistance
3. Good dimensional stability
4. Physiological inertia and suitable to contact with food
5. Good machinability
6. Low impact strength
7. Poor acid resistance and weather resistance
Application
Widely used for sliding and rotating machinery, precision components, gears and bearings in automotive, electronics, medical care, machinery and sports apparatus.

Product detail pictures:

Related Product Guide:
High Density Polyethylene (HDPE) Market – Detailed Survey On Key Trends, Leading Players & Revolutionary Opportunities 2025 | Acetal Delrin Rod
Geotextile Fabrics Market Analysis, Revenue, Price, Share, Growth Rate, Forecast 2028 | Engineering Plastic

The company upholds the philosophy of "Be No.1 in quality, be rooted on credit and trustworthiness for growth", will continue to serve old and new customers from home and overseas whole-heatedly for 8 Year Exporter High Density Polyethylene Sheet - POM Rod – Jing Gu , The product will supply to all over the world, such as: Argentina , Madras , Argentina , Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We have tightened inspection for quality of product.

Cast Nylon Rod

Plastic Rod

Ptfe Tube

Teflon Cutting Board

Teflon Rod

White Nylon Rod

The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.

By Hulda from Jakarta - 2015.06.18 19:26

The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!

By Elaine from Nigeria - 2016.07.07 13:00

Write your message here and send it to us